| |
 |
Single Point Ionizing Nozzle Minimal Compressed Air, Neutralize Static, Adjustable Air Flow - More Power!
Single Point Ionizer Model 50006. Ionizing Nozzles deliver static-neutralizing
air to a target from long range. In addition, they blow away contaminants.
Series installation allows them to be linked on a single cable. |
Advantages
- 6000V of Power means 20% more ions than other suppliers
- Neutralize static, blows away dirt
- Minimal compressed air
- Adjustable air flow
- Maintenance free – quiet
- Rugged – reliable for industrial use
 |
|
|
What Causes Static Electricity?
| Why AiRTX Ionizing Product to Eliminate Static?
Single Point Ionizing Nozzle Technical Data
Single Point Ionizer Model 50006. Ionizing Nozzles deliver static-neutralizing
air to a target from long range. In addition, they blow away contaminants.
Series installation allows them to be linked on a single cable.

Connecting Static Eliminator Bar, Ionizing Gun and Ionizing Nozzles to Power Supply.
While power is unplugged attach ground lead ring terminal to ground terminal on Power Supply. Remove
one of the two red caps on the end of the Power Supply.
Insert power lead into connector and screw in locking nut.
|
|
|
Uses for AiRTX Single Point Ionizing Nozzle
- Around guide rods and rollers on any machinery handling
web or sheet paper and plastic
- Electronics assembly areas or servicing of boards and components
- Heat-set ink dryers, paper and textile drying equipment
- Sheet feeders, unwinders, stackers, separators
- Cutters and slitters for trim removal
- Photofinishing operations
- Pre-paint prep areas
- Lenses, signs, etc.
- Packaging materials
- Pneumatic conveyors
- Injection molded parts
|
| AiRTX Single Point Ionizing Nozzle Advantages |
- 6000V of Power means 20% more ions than other suppliers
- Neutralize static, blows away dirt
- Minimal compressed air
- Adjustable air flow
- Maintenance free – quiet
- Rugged – reliable for industrial use
|
| |
See all Static Control Accessories Here
Frequently Asked Questions
Are the Single Point Ionizers shockless?
The tip of the Ionizer is shielded by the delrin case around the tip, but if you
stick a metal piece into the casing, you can get a spark from the ionizing tip.
This could cause heat which would melt the delrin casing and cause failure.
Is there a minimum length between Single Points when they are multiple
units?
The minimum length between 2 units is 4". Also, when you order, be sure to let us
know the distance needed from the Power Supply to the first Single Point Ionizing
Nozzle.
Call Us for Free Technical Support! 1-800-307-7475 or
contact us
|
 |
|
 |