AiRTX Hurricane Adjustable Air Amplifiers do big air handling jobs with just a small amount of compressed air.
Use them ducted or open, the same way you'd use a vacuum system, fan, or blower, to handle dusts, fumes or granular, stringy material.
Output is fully adjustable without tools or air-wasting shims, making set-up a breeze. 5 sizes available in Aluminum and 4 sizes in Stainless Steel.
The AiRTX Hurricane Adjustable Air Amplifiers
releases a tiny amount of compressed air at near-sonic velocity through an adjustable, internal, ring-shaped nozzle. The high-speed "tube" of air released through the front creates
a strong vacuum behind itself, pulling additional surrounding air through the rear of the amplifier, while pushing the ambient air in front.
Model 15008, 15015 Flow Pattern
Model 15025, 15030 Flow Pattern
Air Amplifier Dimensions
Model
A
B
C
D
E
Dia.
15004
0.50"
1.25"
2.175"
.560"
1/8" NPT
.38"
10004
13mm
31mm
56mm
14mm
9mm
15008
1.250"
2.00"
2.625"
1.02"
1/4" NPT
0.80"
10008
31mm
50mm
67mm
26mm
20mm
15015
2.00"
3.00"
3.25"
1.06"
3/8" NPT
1.65"
10015
50mm
76mm
83mm
27mm
41mm
15025
2.5"
3.7"
3.7"
1.2"
3/8" NPT
2.25"
10025
63mm
93mm
93mm
30mm
57mm
15030
4.00"
5.00"
5.00"
1.50"
1/2" NPT
3.00"
101mm
127mm
127mm
38mm
76mm
Air Amplifier Flow Specs at Factory (Adjustable)
Setting
SS Model#
Aluminum Model #
Throat Diameter
AMP Ratio
Adj. Factory Setting
10004
15004
0.38"
12.1
15 cfm
10008
15008
0.8"
12.1
15 cfm
10015
15015
1.5"
20.1
25 cfm
10025
15025
2.5"
25.1
45 cfm
15030
3
30.1
60 cfm
Industrial Solutions for Air Amplifiers
Metalworking - Grinding
A
model 15015 Air Amplifier boosts a vacuum system by 300 SCFM,
negating the need for a larger, more expensive system to remove
grinding dust.
Woodworking - Sawdust Removal
Model 15008 Amplifier boosts the vacuum system, ending a sawdust
problem on this router. Compressed-air-operated, with no moving
parts, the amplifier eliminates frequent electric motor replacement.
Coolant Mist Removal
Even with doors closed, oily mist often escapes to surrounding
areas. The model 15008 Air Amplifier solves the problem, without
failure of electric motors or expensive vacuum systems.
Extrusion - Rubber Molding Cooling/Drying
Model 10015 Stainless Steel Amplifiers help set-up and cool this
molding after extrusion. Then, they blow off and dry the molding
prior to cutting.
Uses for AiRTX Air Amplifiers
Use Them For
Air conveying any material that can be moved in a rush of air: chips, sawdust,
smoke, paper and cloth trim, grain, dust, capsules, powder
Ventilation and exhaust of smoke/fumes,
replacing fans
Blow-off chips, trim scrap, water, dust
Part cleaning before finishing, replacing open air lines
