Drum Devil Technical Data

Drum Devil & Drum Devil II Specifications Specifications Drum Devil 90600 Recommended Usage: Spill Pick-up/Liquid Operating psi Range: 80-100 psi Noise Level: 78 dBA Vacuum Capabilities 8.5 HG @ 80 psi Gallon of Water Pick-up/Min. 33 gpm Range of Pick-up Materials Water to Wet Sludge Throat Size/Diameter 1.5" Air Consumption 28 cfm @ 80 ps 1. OPERATING INSTRUCTIONS The AiRTX Drum Devil Model 90600 suction pump operates in conjunction with a standard drum and factory compressed air. The Drum Devil operates by passing near sonic air through a .002" annular orifice, creating a vacuum of 8.5” Hg @ 80 psi within the drum. It is recommended that the Drum Devil only be used with steel drums which are in good condition. 2. SET-UP OF DRUM DEVIL MODEL 90600 A. Thread the Drum Devil stem into the 3/4" threaded opening on the drum. B. Thread the 2" threaded plug fitting into the larger threaded opening on the drum. C. Hook up a regulated 3/8" or 1/2" air line to the 1/4” NPT ball valve located on the Drum Devil. To prevent line debris from interfering with pump performance, an air line filter is recommended. AiRTX Air Filter Model 90175 can be used with the Drum Devil Model 90600. D. Insert the 90° Hose Cam cuffed hose securely over the plug fitting now located on the drum. For liquid transfer insert the free end of the hose, with or without attachments, into the liquid to be vacuumed and turn on the air supply, regulated to a working pressure between 70 and 90 psi. A float valve located on the bottom of the Drum Devil will automatically shut off the unit when the drum is full. The ball valve on the Drum Devil may also be used to turn off the unit at any time during operation. E. For wet chip pick up, insert the wand, crevice tool, brush, or skimmer onto the end of the wands. The squeegee tool can be used to pick up liquids from floor areas. Press down and push the squeegee tool away from you to quickly pick up liquid spill. CAUTION IT IS NOT RECOMMENDED TO USE THE DRUM DEVIL MODEL 90600 WITH FLAMMABLE LIQUIDS SINCE A STATE OF VACUUM MAY LOWER THE FLASH POINT. DO NOT USE WITH PLASTIC DRUM - ONLY GOOD CONDITION METAL DRUMS AS IMPLOSION OF THE DRUM WILL OCCUR

• Spill Pick-up
• Liquid transfer, fills 55 gallon barrel under 2 minutes
• Portable vacuum operations
• Cleaning sumps and sludge

Beats shop vacuums on reliability, performance, and price
• Larger tank capacity than industrial shop vacuums
• Eliminates double handling of toxic material and emptying vac canister
• Eliminates need for "floor dry" absorbent
• No efficiency loss after each use like electric-powered shop vacuums
• Made of stainless steel
• Has an automatic float valve to prevent overfilling
• Easily picks up high viscosity liquids, chips & sludge
• Safe in wet areas requiring no electricity