Ionizing Air Guns Technical Data

The Air Gun consumes only 12 cfm at 80 psi 74 dBA @ 80 psi. Connecting Static Eliminator Bar, Ionizing Gun and Ionizing Nozzles to Power Supply While Power Supply is unplugged attach ground lead ring terminal to ground terminal on Power Supply. Remove one of the two red caps on the end of the Power Supply. Insert power lead into connector and screw in locking nut.

• Around guide rods and rollers on any machinery handling web or sheet paper and plastic
• Electronics assembly areas or servicing of boards and components
• Heat-set ink dryers, paper and textile drying equipment
• Sheet feeders, unwinders, stackers, separators
• Cutters and slitters for trim removal
• Photofinishing operations
• Pre-paint prep areas
• Lenses, signs, etc.
• Packaging materials
• Pneumatic conveyors
• Injection molded parts

• 6000V of Power means 20% more ions than other suppliers
• Neutralize static, blows away dirt
• Minimal compressed air
• Adjustable air flow
• Maintenance free – quiet
• Rugged – reliable for industrial use