Air Knives

Aluminum Industrial Air Knife - Series 85000	End View Aluminum Air Knife "Entrained Air versus conventional Open Air Lines" (25:1 air amplification)
Stainless Steel Industrial Air Knife - Series 80000	End View Stainless Steel Air Knife
Aluminum Hurricane Air Knife - Series 86000	Entrained Air from both sides versus conventional one sided Air Knives (50:1 air amplification)
Aluminum Slim Line Air Knife - Series 82000	End View SlimLine Air Knife Entrained air versus conventional Open Air Lines (25:1 air amplification)
Part Number - Series 80000 Air Knives: 1st digit 8 represents Air Knives Series 2nd digit 5 is aluminum 2nd digit 0 is stainless steel 2nd digit 6 is aluminum Hurricane 2nd digit 2 is SlimLine 3rd digit 1 = with filter 3rd digit 2 = w/ Filter and regulator Last 2 digits is effective length	Air Knives Overall length is 1" longer than effective length to allow for air connection to either end. Shims Air Knives over 18" should be supplied with air from both sides. Increase air flow from the Air Knife by installing additional .002" shims. Stainless Steel shims are available for high heat applications. Custom sizes available.

• Removing water from sheet plastic or metal
• Blowing off chips, trim scrap and swarf
• Parts cleaning before painting
• Creating an “air wall" between processes
• Cooling extruded parts
• Cleaning/cooling of metal strip and plastic/paperwebs
• Cleaning/cooling of conveyors and conveyorized parts
• The Slim profile provides a perfect solution in a tight working environment (Series 82000)

• 50:1 Air Flow Amplification (Series 86000)
• Wide area blow-off or cooling with less noise
• Replace open Jets with AiRTX Air Knives
• Low initial and operating costs
• Up to 70% less compressed air usage than open air line
• Easy to control flow/force
• Instant on/off
• No rotating machinery, guards or clumsy ducts
• No maintenance, no moving parts
• No electricity or explosion hazard
• No RF/EMI interference
• Instant on/ off
• Slimmer Cost – 20 to 25% Cost Savings over conventional Air Knives (Series 82000)
• Slimmer Air Usage - 30% less consumption with same (Series 82000) 25:1 Air Amplification (Series 85000/80000)
• Convenient Rear Connection to compressed air source (Series 82000)
• Quiet